NETGEAR WiFi Booster Range Extender | WiFi Extender Booster | WiFi Repeater Internet Booster | Covers up to 600 sq ft and 10 devices | N300 (EX2700)
Last updated on September 7, 2025 10:05 pm Details
NETGEAR WiFi Booster Range Extender | WiFi Extender Booster | WiFi Repeater Internet Booster | Covers up to 600 sq ft and 10 devices | N300 (EX2700)
Original price was: £129.99.£29.99Current price is: £29.99.
Description
- EXTENDED WIRELESS COVERAGE: Adds Wi-Fi range coverage up to 600 sq ft, and connects up to 10 devices such as laptops, smartphones, speakers, IP cameras, tablets, IoT devices, and more. Technical Support on 03448 754000
- N300 WI-FI SPEED: Provides up to 300Mbps performance.
- UNIVERSAL COMPATIBILITY: Works with any wireless router, gateway, or cable modem with Wi-Fi.
- WIRED ETHERNET PORT: Simply plug in game consoles, streaming players, or other nearby wired devices using the one 10/100M port for maximum speed.
- SAFE & SECURE: Supports WEP and WPA/WPA2 wireless security protocols.
- SIMPLE TO SETUP: Press the WPS button to connect to your router. Use the NETGEAR Wi-Fi Analyzer app for optimal location.
- System Requirements : Microsoft, Internet Explorer 5.0, Firefox 2.0 or Safari 1.4 or Google Chrome 11.0 browsers or higher
- Data throughput, signal range, and wireless coverage per sq. ft. are not guaranteed and may vary due to differences in operating environments of wireless networks, including without limitation building materials and wireless interference. Specifications are subject to change without notice.
Additional information
Specification: NETGEAR WiFi Booster Range Extender | WiFi Extender Booster | WiFi Repeater Internet Booster | Covers up to 600 sq ft and 10 devices | N300 (EX2700)
| General | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||
| Specification | ||||||||||||||||||
|
||||||||||||||||||
Reviews (3)
3 reviews for NETGEAR WiFi Booster Range Extender | WiFi Extender Booster | WiFi Repeater Internet Booster | Covers up to 600 sq ft and 10 devices | N300 (EX2700)
Show all
Most Helpful
Highest Rating
Lowest Rating
Mary Rollinson –
I bought a kingbox for 40 pounds and had nothing but trouble, but it was not the box. After running a speed test when netflix was more like no flix i was ready to give up when the speed was Kbs and not Mbs.
Eventually i came across this baby and took full advantage of the same day offer. Ordered it at 10am and got it at 6pm.
Now forget all that browser rubbish. Most routers have a WPS. Simply plug the netgear right by the router. Now wait for the amber light to turn green. Press wps on the side and then you have 2 mins to press the same button on your router. Wait for wps and router indicator on your netgear to be static and green
Now use a tablet or laptop to locate the best PowerPoint and strongest signal. You will see your normal connection with an ext after it once plugged in and all lights static green.
Now you can connect with your usual wifi password to the one with ext.
Now the kingbox is ace and the speeds are 40-79 Mbs. 25 is more than enough to fully stream a film.
I do not…
Andy –
Was a bit concerned as there seems to be a few horror stories on setup. I have a WPS button on my (BT Homehub 3) router and so opted to try that method.
– Note that the supplied instructions for WPS setup in the booklet are good.
– Plug in the extender relatively near to your hub/router. Power button is amber at first and then turns green. Don’t be tempted to plug it in where you have the reception problem!
– Press the WPS button on the extender. The WPS LED on the extender will flash green
– Then press the WPS button on the router. The wireless LED on the router then flashes orange (this will be router specific but valid for the BT hub in question)
– First time nothing much else happened. After about 2 mins nothing had connected and everything had reverted back to the way it was).
– Repeated the exercise and this time the wireless LED on the router illuminated blue (as it should be in normal use). On the extender the WPS LED was now solid green and the router LED was now illuminated…
wagsta –
I have paid full price for this item so as such it is an unbiased review. Having read the varied reviews for this wifi extender I was a little dubious about committing to it but having bit the bullet I have no regrets as it does exactly what it says on the tin. The provided instruction, ‘Quick Start’, booklet is very easy to follow but just in case you are having any doubts or need convincing how easy it is I have compiled this simple to follow guide with photos (Please note that my guide is for WPS set up only but this device can be set up manually for WEP using the instructions in the Quick Start booklet) .
1. Plug the extender into a power outlet as close to your router as is possible, please note that it is a three pin UK plug.
2. Press the WPS button on the side of the extender (See photo #3) and the WPS LED should blink (See photo #4).
3. You must now press the WPS button on your router within two minutes.
4. The WPS LED will continue to blink until it has connected with your…